Folding & Sliding Doors, Multi-Slide Doors, Vinyl Folding Doors

Thank you for choosing the Eclipse Architectural hardware system for exterior folding doors. The hardware, made with great care, if installed correctly will provide years of trouble free operation.

The following instructions provide guidelines for measuring and fitting the suspended folding doors complete with the Eclipse e3™ hardware system.

While this guide is as comprehensive as possible, it cannot address all eventualities, which may be encountered on site. Regardless of the quality of the hardware or construction of the panels, the most important criteria for a successful job are:

• Level, flat rough floor
• Square rough opening
• Structurally sound and unyielding rough opening header
• Clean door assembly tracks

Note: Eclipse Architectural is unable, and does not control, the actual site measuring and installation of the doors or hardware, and therefore does not assume any responsibility for the performance of the installed product.

The instructions below should be followed and adhered to. The provided below step-by-step instructions can assist any fabricator or installer. Installation is best done with more than one person.

Thank you for choosing the hardware, track, sill and weatherseal products by Eclipse Architectural, A division of A.K. Draft Seal Ltd, Vancouver, Canada